The bellhousing to clutch fork rubber boot seals out water and dust by sealing around the clutch fork and the rectangular fork hole in the Camaro clutch bellhousing. Every time you push the clutch pedal in your manual transmission Camaro…
Split nylon flange bushings fit over clutch pedal cross shaft and inside cross shaft sleeve for clutch and brake pedals with 5/8" diameter cross shaft. These OER® reproduction bushings will help eliminate excessive side to side…
Reproduction Of Original Screws Into Bellhousing Your clutch fork ball stud is what is used to screw into your 1967, 1968, or 1969 Camaro?s bellhousing to mount the clutch fork. The clutch fork is used to push the throwout bearing in when…
Engineered and manufactured for reliability, these alloy steel flywheel bolts are heat treated to grade 8 specifications for extra strength. Kits are complete with lock washers, where needed, and are black plated to help resist rust and…
Stock Replacement Original GM Part Stamped Steel Semi-Gloss Black Fits Many Small Block Applications Using A 10? Bellhousing & 153 Tooth Flywheel 1967-1969 302 Z/28, 327 1969-1974 307 1970 350 Whether you are hearing unwanted rattling…
Set Of 6 Correct High Grade Bolts Attaches Pressure Plate To Flywheel Heat Treated To Grade 8 Includes Matching Washers Fasteners Yield 120,000 Psi Black Plated Finish 3/8-16 Thread Size Bolts Correct Through 1987, Will Need Different…
OER® reproduction of the upper clutch push rod boot. This rubber boot mounts on the firewall and prohibits water, chemicals, and other elements from entering the drivers compartment through the clutch rod…
Set of four reproduction pedal shaft bushings. Used with all automatic and manual pedals. Group 0.831 and 4.626 GM Part #: 3798256, 3965692, 1247439, 140048221…
High Quality Reproduction Flywheel Dust Cover Stamped Steel Semi Gloss Black Fits 1975-1979 Camaro With 350 Firs 1976-1981 Camaro With 305 Whether you are hearing unwanted rattling vibrations from your transmission, or you're starting to…
Correct cover plate which is located on the back of the engine block and is used to cover the flywheel.
Applications:
1962-67 V8 283ci
1962-69 6 cyl. exc. P.G.
1962-69 V8 327ci exc. P.G.
1967-69 V8302ci
1968-69 V8 307ci exc…
Reproduction cover designed to protect the clutch flywheel housing. This often cracked or missing cover is required to keep water and other road debris from entering this crucial area and causing damage.
Applications
1975-81 Ca…
Best Quality Reproduction Bellcrank Seals Heavy, Die Cut Felt Fiber As Original Keeps Grease In The Clutch Bellcrank Where It Belongs 9/16 ID & 1? OD This little Camaro part does a big job and will wear out easily from years of use and…
Restoration Correct Original AC Delco Part Correct Fit And Finish Fits V6, Vin S And V8, Vin P Engines Also Fits RS 93, Z28 93-95 Made In USA Is the Clutch Master Cylinder leaking on your 1993-1995 Camaro, or does your clutch pedal feel…
Accurately machined Frame pivot ball stud fits all original and reproduction big and small block clutch bellcranks. Unlike cheap knock-offs offered elsewhere, ours are heat treated for hardness as original. Black oil finish. Overall length…
Best Quality Camaro Clutch Extension Wire Correct Length Plated As Original For Use On Small Blocks With Clutch Return Spring Our Part # CL-6 Fits 1967-1975 Small Block Fits 1967-1972 Big Block The Camaro coupe or convertible clutch spring…